Mine atmospheric monitoring system
| 
Products - Mine atmospheric monitoring system
| ||||
|---|---|---|---|---|
|
MARA-02
|
Equipment for automatic monitoring of gas wells and ventilation deep wells. The methane concentration (CH 4 ), velocity and flow direction are monitored on the given well. When ordering, use the model: MARA-02, SIM card yes / no, X pcs. |
Prospect
|
Catalogue
|
User's guide On request |
|
ALTAIR 5X
|
Multifunction detector with removable plug-and-play sensing slots. The detector can be equipped with up to five sensors that can display values for six separate gases |
Prospect
|
Catalogue
|
User's guide On request |
|
G999
|
Hand-held measuring devices for personal protection against the dangers of toxic or explosive gases and vapors as well as against lack or excess of oxygen. |
Prospect
|
Catalogue
|
User's guide On request |
|
SC-UAN-01 |
The stationary anemometer designed for continuous measurement of air velocity in mine tunnels, tunnels and galleries. |
Prospect
|
Catalogue
|
User's guide On request |
|
SC-CH4 - XXXX |
Stationary combustible gas sensor, designed for continuous measurement of the volume concentration of combustible gases in the atmosphere. When ordering, specify according to the Instructions for Use. |
Prospect
|
Catalogue
|
User's guide On request |
|
SC-TOX- XXXXXX |
Stationary toxic gas sensor. It is designed for continuous measurement of the volume concentration of various toxic gases or oxygen by an electrochemical sensor. When ordering, specify according to the Instructions for Use. |
Prospect |
Catalogue
|
User's guide On request |
|
SC-IR |
Stationary combustible gas sensor, designed for continuous measurement of the volume concentration of CO 2 and CH 4 in the atmosphere. When ordering, specify according to the Instructions for Use. |
Prospect
|
Catalogue
|
User's guide On request |
|
SC-LCD-XX |
Gas sensor display. The additional display with SC-LCD is used in cases where the sensor is installed in an inaccessible place, ie out of reach of the operator. When ordering, specify according to the Instructions for Use. |
Prospect
|
Catalogue
|
User's guide On request |
|
SC-CH4-TM |
Stationary combustible gas sensor, designed for continuous measurement of the volume concentration of combustible gases in the atmosphere. When ordering, specify according to the Instructions for Use. |
Prospect
|
Catalogue
|
User's guide On request |
|
SC-SET-CH4 |
Calibrating set is intended for calibration and verification of methane detectors SC-CH4,SC-CH4-TM and others. Includes SC-KAL (calibration attachment on the sensor head). Leather bag or plastic case version. |
Prospect
|
Catalogue
|
User's guide
|
Anemometer SC-UAN-01
| SC-UAN-01 anemometer both for mines and surface
Connectable also to the DPS-11 system
ATEX certification
Advantages of the anemometer:
Automatic device
High precision of measurement
Long-term reliability and durability
Variable connectivity of the device
Possibility to archive and view measured data in SCADA SW
The SC-UAN-01 is intended for permanent air speed measurements in various environments both without and with a risk of methane explosion. The explosion proof design I M1/II 2GD Ex ia I/IIC T135°C allows its usage in areas subject to methane explosion hazard in coal mines or in zones 1, 2, 21 and 22.
SC-UAN-01 allows displaying values on a LCD with an optional backlight. Alarm conditions are indicated locally by a red LED. The delivered SCADA SW allows archiving and viewing the measured data and alarm conditions. A cable can be connected using a cable gland or connector. The optional communication language on LCD is Czech, Russian and English in the standard version.
Basic parameters for applications:
- max. air speed 15 m/s
- barometric pressure 90 to 110 kPa
- operating temperature 0 °C to +40 °C
- preciseness 5 % ±0.1 m/s
- weight approx. 2,5 kg
- protection IP 65
- power supply 10 to 30 V (10 to 22 V for IIC)