| Automation, Measuring and Regulation Elements |
|
FLOW-01
|
flow meter serves for continuous measuring of flowed medium.
|
|
|
|
|
SMA-01
|
is meant for simple automation and replacing of complex relay connections as well as for controlling of power equipments. It is intended for the environments with the methane explosion hazard of gaseous mines.
|
|
|
|
|
SMA-03
|
is used for
combining the Ethernet signal, converting it to the DSL
signal and for distance transmission of the DSL signal via
the telephone line.
|
|
|
|
|
LS-01
|
explosion-proof aiming lasers are intended for aiming of the direction at construction of tunnels and driving of entries in the mining industry.
|
|
|
|
|
EV 5N/2.5
|
valve is used for remote direct controlling of pneumatic systems, for example for alternating filling and emptying of spaces with compressed air, with pneumatic cylinders, drives etc.
|
|
|
|
|
EV 5N/10
|
valve is used for remote direct controlling of pneumatic systems with a larger volume, for example for alternating filling and emptying of rooms with compressed air, with pneumatic cylinders, drives, etc.
|
|
|
|
|
SN 1A
|
bushing converter in intended for the detection of the presence of voltage from power circuits in the standardized line from 24 V, 50 Hz to 1000 V/50 Hz to galvanic-separated signals to verified JB circuits or the power circuits up to 60 V.
|
|
|
|
|
TP 1
|
A bar potentiometer serves for measuring a hydraulic
cylinder extension e.g. in the system of hydraulic mine
reinforcement.
|
|
|
|
|
ACC-700-N
|
chargers, the ACC-700N line, consist of automated charging circuits, accumulator connectors for the Signal 5, LED indication lights and the outer casing.
|
|
|
|
|
ACC-PB
|
charger for the Pb accumulators ACC-PB serves for charging of lead accumulators with the voltage of 12 V and the capacity of 100 Ah, or for charging of electronically backed-up systems.
|
|
|
|
|
AN24/10A.X
|
explosion-proof alternator, serving as an energy source for various devices in the spaces where there is an explosion hazard.
|
|
|
|
|
MS-02
|
magnetic detector. It is intended for finding of the directions or positions of mining machinery or blast furnace skips. It has got the so-called memory relay.
|
|
|
|
|
MS-03
|
magnetic detector. It is intended for the finding of positions of trouser chutes on overfill, or end positions of machines.
|
|
|
|
|
MS-04
|
cable magnetic detector serves for indication of alternating current going through the cable.
|
|
|
|
|
KPV-01
|
scales which is to be installed on the belt conveyor in underground mine spaces and tunnels.
|
|
|
|
|
KPV-02
|
the KPV-02 conveyor scale is used to measure the output
of the conveyor belt (material flow) and to calculate the total
weight of the transported material.
|
|
|
|
|
SAD-01
|
is intended for continuous measuring of ash matter contents in solid fuels.
|
|
|
|
|
SAD-04
|
evaluation unit SAD-04 is a device for evaluating,
processing and transmitting analogous, binary and data
signals.
|
|
|
|
|
SME-01
|
the SME-01 equipment is used to measure gas flow. The
equipment is intended for use in potentially explosive
mines.
|
|
|
|
|
OP-01
|
the OP-01 control converter is used to switch loads on and
off, to control heavy-current equipment with a controller in a
potentially explosive atmosphere, and to evaluate the
signal using a standard NAMUR sensor.
|
|
|
|
